...
Trigger Activation based on your preference. To RisingEdge if you want to trigger camera when trigger is received.
Digital Output
| Note |
|---|
OUT1 is reserved for Industrial Light control. |
To wire Digital Outputs, please refer to pin assignment.
Available Digital Output pins are:
Pin #6 - OUT2
Pin #7 - OUT3
Pin #9 - OUT4
| Note |
|---|
Outputs are set after image inference is done. Example: Image is triggered, trained models are processed and only then output is set. |
Trigger
Always - On every inference, the output is set.
Good - when the current inference (image) is evaluated as OK based on your module setting, only then the output is set.
Bad - when the current inference (image) is evaluated as NG based on your module setting, only then the output is set.
Set outputs
ON - Output is in use. On inference, set to ON state.
OFF - Output is in use. On inference, set to OFF state.
None - Output not in use.